9
ENG
Out of operation
TROUBLESHOOTING
• Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for
several hours; during the power failure, the times of door opening should be reduced, and no more
fresh food should be put into the appliance.
• Long-time nonuse: The appliance should be unplugged and then cleaned; then the doors are left open
to prevent odor.
• Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable
holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and
seal them with tape. During moving, the appliance should not be laid upside down or horizontally, or
be vibrated; the inclination during movement should be no more than 45°.
The appliance should run continuously once it is started. Generally, the operation of the
appliance should not be interrupted; otherwise the service life may be impaired.
You may try to solve the following simple problems by yourself. If them cannot be solved, please contact
the after-sales department.
Failed operation
Check whether the appliance is connected to power or whether the plug is
in well contact
Check whether the voltage is too low
Check whether there is a power failure or partial circuits have tripped
Odor
Odorous foods should be tightly wrapped
Check whether there is any rotten food
Clean the inside of the refrigerator
Long-time operation
of the compressor
Long operation of the refrigerator is normal in summer when the ambient
temperature is high
It is not suggestible having too much food in the appliance at the same time
Food should get cool before being put into the appliance
The doors are opened too frequently
Light fails to get lit
Check whether the refrigerator is connected to power supply and whether
the illuminating light is damaged
Have the light replaced by a specialist
Doors cannot be
properly closed
The door is stuck by food packages
Too much food is placed
The refrigerator is tilted
Loud noise
Check whether the floor is level and whether the refrigerator is placed stably
Check whether accessories are placed at proper locations
Door seal fails to be
tight
Remove foreign matters on the door seal
Heat the door seal and then cool it for restoration
(or blow it with an electrical drier or use a hot towel for heating)
• You can also use the appropriate amount of hot water to speed up the defrost, with a dry towel to dry
the water after defrosting.
• After defrosting, put back the foods in cabinet , and power on the refrigerator.
Summary of Contents for RS0903M
Page 56: ...tesla info...