Tesla RS0901H, User Manual

Page: 4 / 32

4
ENG
REVERSE DOOR
Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the
door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It’s better that 2 people handle the unit during assembly.
Remove the top right
hinge cover.
Undo the screws. Then
remove the hinge
bracket.
Refit the bracket fitting
the bottom hinge pin.
Replace both adjustable
feet.
7. Place the door back on.
Ensure the door is aligned
horizontally and vertically
so that the seals are
closed on all sides before
finally tightening the top
hinge.
8. Insert the hinge bracket
and screw it to the top of
the unit.
9. Use a spanner to tighten it
if necessary.
Put the hinge cover and
the screw cover back.
Remove the top left
screw cover.
Move the core cover
from the left side to
right side. And then lift
the upper door and
place it on a padded
surface to prevent it from
scratching.
Unscrew and remove the bottom hinge pin, turn the bracket over
and replace it.
180°
2 6
8 9 7
10
3
4
5
1
unscrew