Tesla RC4200FMX, User Manual

Page: 9 / 72

9
ENG
Starting to use
Energy saving tips
• Before initial start, keep the refrigerator
still for two hours before connecting it
to power supply.
• Before putting any fresh or frozen
foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in
summer when the ambient temperature
is high.
• The appliance should be located in the coolest area of the room, away from heat producing appliances
or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.This cuts
down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
• Spare enough space for
convenient opening of
the doors and drawers
or statement by the
distributor.
Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service
agent or similar qualified person.
8. Take out the top left hinge from accessory bag.
Put refrigerating chamber door on middle hinge, install top left hinge. Connect signal line terminal
❹
with signal line terminal ,connect signal line terminal with signal line terminal; Install top hinge cover.
For the assembly of handle, please refer to chapter 2.2.
❶
❹
❸
❷
decorative cover
hinge cover
(The picture above is only for reference.The actual
configuration will depend on the physical product
or statement by the distributor)