7
OPERATING THE DEVICE
MAINTENANCE AND CLEANING
TROUBLESHOOTING
STORAGE
DELIVERING AND TRANSPORT
RECYCLING:
SUITABLE FOR EEE REGULATION.
When storing your device, you can wrap the power cord and place it in the cradle on the back of the device.
Before winding up the power cable, you must definitely wait for the device to cool down.
When not in use, keep your device in a dry place.
The device must be transported in its original packaging or in a good and soft package to prevent damage to the device.
Follow the signs on the packaging.
Mount the feet to the body of your heater with the screws shown in Figure 2.
• After placing your heater in one of the positions shown in the figure, plug it in a grounding socket.
• Smoke and odor may occur due to the first use of your heater.
• You can operate your heater in two steps as low power and high power.
• You can operate your heater at the desired temperature level between 1 and 9.
• Before starting to clean your device, turn off the device, unplug the power cord for safety and wait for the device to cool
down.
• The outer surface of the device should be cleaned with a soft, cotton, slightly damp cloth or a soft brush.
• Never use abrasives or solvents to clean the heater.
• Do not clean the product with substances such as gasoline, thinner solvent, etc. that will corrode or damage the product.
• These substances can damage plastic parts.
• Do not clean your device using steam cleaners.
• Do not expose your device to water.
• Never immerse your product in any liquid for cleaning.
Problem
Cause
Solution
The device does not work
The device may be not plugged
The device is not switched on
There is no power in the socket
The cable may be damaged
Insert the plug into the socket
Start the device
Try another socket
Call the Authorized Service
The device is very hot
The device may have been operated
for too long
Let the device cool down
The device stops automatically
while it is working.
The safety system on the device is
activated.
Let the device cool down, if the problem
continues, call the authorized service.
WEEE:
This device should not be disposed of as it consists of recyclable parts in accordance with WEEE directives. Please
contact the nearest collection center to recycle this device. Keep the packaging materials out of the reach of children or
dispose of them by classifying them in accordance with the waste instructions. Do not dispose of your device and its
packaging with normal household waste.
Summary of Contents for PC251BL
