Tesla PC251BL, User Manual

Page: 6 / 52

6
Thermostat
adjustment button
1st Position Step
Switch
2nd Position
TECHNICAL SPECIFICATIONS
INSTALLATION
INSTALLING ON WALL
MODEL POWER CLASS VOLTAGE FREQUENCY
PC251BL 2500W I 220V-240V~ 50Hz-60Hz
This product has been produced in accordance with safety rules and directives in force.
NOTE
The values stated in the markings on the product or in other printed documents provided with the products are the values
obtained in the laboratory environment in respect of the relevant standards. These values may change according to the use
and ambient conditions of the product
• If you want to install it on the wall, do not mount the feet.
• Your heater can be used hanged on the wall. Your heater should be placed horizontally according to the minimum
distance to be followed (Figure 1).
• To hang your heater on the wall, you need to use 2 screws and 2 dowels supplied with the product. Drill the screw holes
in the wall with an interval measure of 480 mm.
• Hang the device on the wall and fix it horizontally using the fixing holes (Figure 2).
Your device is completely ready to use and does not require any assembly or electrical connection.
CAUTION!
Before plugging in, make sure that the Power is in the OFF position.
Wall opening measure
Figure 1
Figure 2