Tesla KR600RA, User Manual

Page: 9 / 112

9
4.
1. Fit the meat tray (9) onto the meat grinder body (8) so
that the wide part is positioned over the motor house of
the appliance.
2. Place the mixing bowl (26) or similar under the meat
grinder body opening.
3. The appliance is now ready for use.
6.
1. Switch off the appliance by turn knob to O when you
have finished grinding the meat. Switch off the appliance
at the switch and unplug it before you change the
accessories, or before you take the appliance apart or
when not in use.
2. Remove pusher and meat tray.
5.
1. Plug the power cord into main power outlet and
switches it ON.
2. Plug the power cord into main power outlet and
switches it ON. Turn Speed control knob to speed1(or
any speed setting) indicator light on the control panel
will now be illuminated.
3. Cut your meat into smaller pieces, so the pieces fit into
the feeding tube. Dice or cut into strips with a width of
approx. 2.5 cm.
4. Put the pieces onto the tray(9).
5. Select the speed you want using the four speed buttons.
Recommended speeds are shown in the table above.
6. The meat pieces travel down the feeding tube. Push
down carefully with the tamper (10). Do not press too
hard, otherwise you may damage the appliance.
7.
To detach the meat grinder, turn the body so the arrow is
aligned with the circle and then remove.
8.
Fit the protective cover over the accessory socket again.