Tesla 32K307BH, Operating Instruction

Page: 10 / 223

8
ENG
Remote Control
Remote control battery installation method
Precautions for use of remote control
Take off the cover of battery box, insert two AAA batteries with 1.5 volts, and adjust with the polarity of the remote
control battery box.
1. When using the remote control you should point it to the remote-control inductive window. The objects between the
remote control and inductive window may hinder normal operation.
2. Do not expose the remote control to fierce vibrations. Furthermore, do not expose the remote control to direct
sunlight, for the thermal energy will cause the distortion of the remote control.
3. If the remote-control inductive window of the main device is exposed to direct sunlight or intense illumination, the
remote control can malfunction; please change the angle of illumination or this device, or approach the inductive
window to operate the remote control.
4. Low battery voltage influences the remote control distance. You should replace the battery. If you do not use the
remote control for long or if the battery is exhausted, please take out the battery, in order to avoid battery leakage
causing corrosion of the remote control and its damage.
5. Do not use different batteries. Combining new and old batteries is not allowed. You should use batteries in pair.
6. Do not throw batteries into fire, do not charge or disassemble, especially do not charge, assemble or disassemble,
heat or burn used batteries. Please observe the related environmental protection regulations on used batteries.
1. Power LED indicator and remote receiving window.
2. Power switch (optional): Press „
I
“ end to turn power on, and press „
O
“ end to turn power off.
3.
SOURCE:
Press this key to enter the menu of signal source and choose signal source.
4. CH-, CH+ ( ): Press these two keys to select the channel. In OSD menu, press the two keys,
sharing the function with  /  key on the remote control, to adjust the items.
5. VOL-, VOL+ ( ): Press these two keys to add or reduce volume. In OSD menu, press the two
keys to adjust the analogue value of the selected item. These keys have the same functions as t / u
key on the remote control.
6.
MENU ( ):
Press this key to enter main menu.
7.
Standby:
To switch the TV on or back to standby.
Note: Different models may have different appearances; please refer to the actual device.
43”