![background image](http://html1.mh-extra.com/html/tesla/2012-model-s/2012-model-s_owners-manual_1091126014.webp)
Rear Trunk
Rear Trunk
2.8
MODEL S OWNERS MANUAL
Rear Trunk
Opening
To open the rear trunk, do one of the following:
•
Touch
Controls > Trunk
on the touchscreen.
•
Double-click the Trunk button on the key.
•
Press the switch located under the exterior
handle (if not equipped with the optional
tech package, you must first unlock
Model S).
When the liftgate is open, the
instrument panel displays the Door
Open indicator light. The image of the
Model S on the touchscreen Controls window
also displays the open trunk.
To stop a powered liftgate while it is moving,
single-click the Trunk button on the key. Then,
when you double-click the Trunk button, it
moves again, but in the opposite direction
(provided it was not almost entirely open or
closed when you stopped it). For example, if
you single-click to stop the liftgate while it is
opening, when you double-click, it closes.
To open the trunk in the unlikely situation in
which Model S has no electrical power, see
page 2.9.
Closing
To close the trunk, pull down on the liftgate and
push firmly, ensuring it is fully closed.
If Model S is equipped with the optional tech
package, you can close the powered liftgate by:
•
Double-clicking the trunk button on the key.
•
Touching
Controls > Trunk
on the
touchscreen.
•
Pressing the switch located on the
underside of the liftgate (see page 2.8).
If a powered liftgate senses an obstruction
when closing, it automatically opens and
sounds two chimes. Remove the obstruction
and try closing it again. If it cannot close the
second time, powered operation is temporarily
disabled. Manually closing it restores powered
operation.
NOTE: The power closing feature is also
temporarily disabled if you leave the powered
liftgate open for more than an hour.
Adjusting the Opening Height
If Model S is equipped with a powered liftgate,
you can adjust its opening height to make it
easier to reach:
1.
Open the liftgate, then lower it to the
desired opening height.
2.
Press and hold the button on the underside
of the liftgate for 2 seconds until you hear a
confirmation beep.
3.
Confirm that you have set it to the desired
height by closing the liftgate, then
reopening it.
book.book Page 8 Tuesday, September 17, 2013 12:33 PM