23
PEAK OFF
this selection enables no inrush current above what is set by
the current limit control from the DB9 or to the I INPUT BNC
connector. The current limit circuitry will start immediately.
3x I CONTROL
this selection will allow an inrush current of three times the
programmed current limit for 200 ms before the current
limitation starts.
3x I MAX
this selection will allow an inrush current of three times the
maximum current available from the battery simulator
for 200 ms before the current limitation starts.
4.10 The output range button
This button toggles between the two available output ranges:
30 V
this option selects a maximum usable range of +30 /-15 V
for greater efficiency.
60 V
this options selects a maximum usable range of +60 /-15 V
for testing up to the full power of the battery simulator.
