Tescun PL-660, Operation Manual

Page: 26 / 34

. -- 26 --
SYSTEM SETTING (In Power Off Mode)
Note: This radio is default to use rechargeable batteries for power supply. In case of
using regular batteries, you should switch the radio system to regular
batteries mode in order to show the correct power capacity.
RESET PROCEDURE
If the radio does not function properly, you
can perform a reset by using a pointed object
such as straightened paper clip, into the
[RESET] hole in the bottom of the unit, and
gently press and release.
Note: Station memory will not be removed
after you push the reset button.
IMPORTANT MATTERS FOR USING BATTERIES
1. The Clock memory will be gone if the unit has no power supplied by either
batteries or adaptor for a long time, but the pre-stored frequencies will still be
kept.
2. When the battery power is low, the " " symbol in the display will flash to alert
you for changing new batteries. And it will turns off automatically when the
power is gone.
3. Mix using the used & new batteries would cause damage of radio and incorrect
display of power capacity.
4. In order to avoid leakage, always remove the batteries when the unit will not be
used for a long period of time.