Tescun PL-660, Operation Manual

Page: 11 / 34

-- 11 -- .
TUNE IN STATIONS
Press the [POWER] button to turn on your radio, then select your desired band by
pressing [FM] , [AM] , SW [ ] / [ ] , or [AIR] button. In case of receiving
FM/AIR/SW broadcasting, fully extend the telescopic antenna for a better reception.
When receiving MW and LW broadcasting, please rotate the radio or change it's
location to achieve optimum reception. You can rotate the
[VOLUME] knob to
adjust to appropriate volume.
Now, you can turn into your favorite stations with any of the below tuning methods:
METHOD 1; MANUAL STATION TUNING
Press the [VF/VM] button to switch into
frequency mode with frequency short-flash
on the display, and then rotate the
[TUNING] knob to select your desired
station.
METHOD 2: AUTO BROWSE STATION
1. Press the [VF/VM] button with
frequency short-flash on the display to
switch into frequency mode.
2. Press & hold the [VF/VM] button to
scan from one station to another,
staying on each station for about 5
seconds.
3. To stop the auto browse function,
simply rotate the
[TUNING] knob or
press on the [VF/VM] button again to
confirm on your desired station.