99
10
[Timing of charge]
●
The low battery status is indicated by the battery lamp that flashes (when the power is on) while
consecutive short beeps [pit pit pit …] are generated for 10 sec, and the power is turned off
automatically.
-> Immediately charge the battery.
●
This product can be used with AC 100 to 240V power supply.
[Safety device]
●
If water enters the head inserting block, the power can no longer be turned on or off owing to
action of the safety device.
-> To take action for this case, with the head removed from the body, drain off the water from the
head and head inserting block, clean them, reinstall the head in the initial position, and press
the Power switch to restore to normal operation.
[Cleaning]
●
Make sure that the power is off and the power adapter has been removed. Then start the cleaning.
●
Body, head, and spatula block
Wipe away dirt and grime using a soft dry cloth.
●
If it is difficult to remove dirt or grime from the body, soak a soft cloth in a soap-and-water
solution or a water-diluted neutral detergent, and wring well. Then, use this cloth to wipe dirt and
grime off the body.
●
Body
●
Spatula block
●
Head
To wipe the head
inserting block, use a
soft dry cloth.
* A wet cloth must
not be used to wipe
the inserting block.
Water tank and water tank cap
Discard the tank water. Then, after drying naturally, reinstall the tank on the body.
How to Use
