Tescom T-100 Series, User Manual, Page: 14 / 23

T-100 Series UPS User Manual
11
4.4.2 First message (Up) line of the LCD
LOAD
The percentage of the load connected to the UPS output during this message
the sound button enables/disables sound alarm.
OUTPUT
UPS output Voltage during this message the sound button enables/disables
sound alarm.
BATTERY
UPS battery Voltage during this message the sound button enables/disables
sound alarm.
LINE
Line Voltage at the UPS input during this message the sound button
enables/disables sound alarm.
LANG. ENGLISH
Display language during this message the sound button enables/disables sound
alarm.
FREQ
UPS output frequency during this message the sound button enables/disables
sound alarm.
SOUND ON
SOUND OFF Audible alarm is active.
Audible alarm is not active.( disabled by the user) Each press to this button
will change the status.
BATT.USED It shows battery operation time (the time passed after the last line failure alarm)
MOD: ONLINE
MOD : ECONO
This parameter determines the operation type of the UPS. Econo mode means
that if the mains is okay the load is fed from mains if the line failure alarm
occurs UPS feeds the load. (OFFLINE UPS)
SYNC:OK
COMM:OK
UPS and LINE synchronization status.
Communication active. (If PC sends data to UPS COMM:OK message will be
showed for 3 seconds)
LOG. EVENT
Your UPS records and keeps all its faults and alarms up to 64 events in its
memory for future monitoring. Events are recorded in the order of occurrence.
The upper line on LCD indicates the recorded event number, “000” being the
last event. The lover line shows the name of the event. While monitoring the
recorded events, you can return to event number ”000” by pressing the “sound
off” button for a relatively long time.
LCD
(2) Display Select
(1) Sound On-Off Button
Figure 4.1 Control Panel
Status Indicators