Tescom STS 1000A 3 Pole, User Manual

Page: 42 / 47

42
OPTION MENU - DEFAULT PARAMETERS
PARAMETERS
PREFERRED
R-XFER
D.R-XFER
OVLOAD
AL HOLD
NSYNC. TR
OVL. RESET
INH. RESET
REMOTE
RET. MODE
Ph-cyclic AL
SCR ALARM
MAN. XFER
LANGUAGE
XFER ACTION
USER PSW
► TIME MENU
CONFIGURATIONS
AVAILABLES
Source 1 or 2
ON / OFF
16 ÷ 127 sec.
Enable / Disable
8 ÷64 sec.
0 current, delay, disable
auto – manual
auto – manual
ON / OFF
0 current, wait synchro, delay, swift
ON / OFF
ON / OFF
0 current, swift
ENGLISH / ITALIAN
SHUT / STAY
Table no. 14
DEFAULT
Source 1
ON
16 sec.
Disable
10 sec.
0 current
Automatic
Manual
ON
Swift
ON
ON
Swift
ENGLISH
Shut
0000
This menu can be used to set the date and time of the STS real time clock.
TIME: 10:30 Current time on the RTC
DATE: 19-10-2007 Current date on the RTC
SET HOURS: 10
SET MINS: 30
SET DAY: 19
SET MONTH: 10
Press the LEFT or RIGHT key to change the hour
Press the LEFT or RIGHT key to change the minutes
Press the LEFT or RIGHT key to change the day
Press the LEFT or RIGHT key to change the month
SET YEAR: 2007 Press the LEFT or RIGHT key to change the year
ENT: UPDATE
ENT: EXIT
Press the ENTER key to update date and time
Press the ENTER key to exit the TIME MENU
►
INFORMATION MENU
This menu contains information on the status and the transmission of STS data.
RS232 receive: OK
receive via RS232 is active
RS232 receive: ---
receive via RS232 is not active
This message indicates that the STS is connected to a PC via serial communication.
This may help the user with regards to any losses of communication.
VERSION: STA10-XX
This message indicates the Version of the control software.