
How to Use
1
Remove the cap.
2
Push the power switch and turn on the product.
3
4
Level Change
Switch
Earth Plate
Do not use on areas other than below the
eyes (from corner to corner).
There is a risk of accident or injury.
Do not use with contact lenses in.
There is a risk of eye problems.
Use for up to 7 minutes at a time, twice per day.
The power will turn OFF automatically 7 minutes after pushing the power switch.
There will be a beep and the LOW level display light will blink.
The roller ball will warm up to usable temperature approximately 2 minutes
after pushing the power switch. The level display light will change from blink-
ing to a steady light.
●
See Page 9 for using while plugged in.
Use the level change switch to set
the microcurrent level.
It will be set at LOW upon turning on.
The display light for the level chosen will blink or
be a steady light.
●
When first using, start by using the LOW setting
for short periods of time.
●
If something seems strange during use, stop
using the product.
Make sure that your hand is touching either the
left or right earth plate when holding the main
unit. While using, there is no effect if your hand
is not touching the earth plate.
Hold the main unit so your hand is
touching the earth plate.
How to Use
5
●
Sometimes the head can become hot, so make
sure to check the temperature of the head before
placing it on your skin.
6
●
●
The power will turn off automatically after 7 minutes.
At that time, a beeping noise will alert you.
7
Always check with
your fingertip.
(About 40°
C)
【When to Charge】
Beep
, bee
p
Long-term
Storage
After use, push the power switch and turn off the power.
The level display light will turn off.
Perform maintenance (Page 9), put on the cap and store
the product in an area free of dust and moisture.
Start using when the level display light
becomes steady. Slowly move the roller
ball from corner to corner of your eyes.
●
Move slowly, without stopping in one spot.
●
Do not use on areas other than those specified.
●
If it feels too hot, stop using.
●
Do not use continuously. Use only for less than 7 minutes at a time twice
per day.
More use can cause skin problems.
●
Use in an ambient temperature between 10 and 40°
C.
(Suggested ambient temperature: 15 to 35°
C)
Perform maintenance (Page 9) before storing.
1.
Put the cap on the head.
2.
Make sure to charge it.
3.
Store in an area free of dust and moisture.
The signal for low batteries is when the battery
light begins blinking while the power is on and a
warning beeping occurs for 10 seconds before
the power automatically turns off.
→
Charge immediately.
To continue using, use it while plugged in.
Alert
7
8
Summary of Contents for NOBBY NTE11
