Tescom NEOLINE 6-20KVA UPS, User Manual

Page: 23 / 34

19
10.1 Bypass mode
The LCD display in Bypass mode is shown in the following diagram. The information about the utility power, the
battery, the UPS temperature and load could be displayed. The operating mode code of the UPS is “01”. The
UPS will beep once every 2 minutes in Bypass mode.
Bypass mode
10.2 Line mode
The LCD display in Line mode is shown in the following diagram. The information about the utility power, the
battery, the temperature and load could be displayed, The operating mode code of the UPS is “02”.
Line mode
If output overloaded, the load percent is shown and alarm will keep twice every second. You should get rid of
some unnecessary loads one by one to decrease the loads connected to the UPS less than 90% of its nominal
power capacity.