55
6
How to Use
5
Once the level indicator lamp lights up, you can
start using the appliance. Move the roller ball
slowly from the inner corner to the outer corner of
your eye.
●
The roller ball temperature may be too high. Before placing the ball
cover on your skin, be sure to check its temperature.
●
This appliance should be used on bare
skin without makeup.
●
Continue to move the roller ball slowly instead of stopping it at a
single point.
●
Do not use the head on any regions other than those specified.
●
If you feel that the ball cover temperature is too hot, stop use.
●
The appliance should be used up to twice a day (7 min for each
session) without continuous use. Failure to follow these instructions
may result in, skin overload, thereby causing skin problems.
●
Use the appliance at an ambient temperature of 10 to 40°C.
(Recommended ambient temperature: 15 to 35°C)
6
After using the appliance, press the Power switch
to turn off the power.
The level indicator lamp is extinguished.
●
The power is turned off automatically after a lapse of 7 min. At
this time, consecutive short beeps [pit pit pit …] are generated to
indicate the shutdown.
7
After cleaning the appliance, reinstall the cap on the roller ball. Then, store the
product in a low-humidity, low-dust location.
Be sure to check the
temperature with your
fingertip.
(Approx. 40°C)
[Timing of charge]
●
The low battery status is indicated by the battery lamp that flashes
(when the power is on) while consecutive short beeps [pit pit pit …] are
generated for 10 sec, and the power is turned off automatically.
-> Immediately charge the battery.
For continuous use, use it with the alternatiing current system.
●
This product can be used with AC 100 to 240V power supply.
“Pit pit ……”