TRC13
EN
7
Setting the cutting length
To set the cutting length, press the lock button
2.
on the Cutting Length Control and slide the
control to set for a shorter or longer cut.
The cutting length is marked on the side of the
comb.
Set the Thinning control to the left position to
3.
cut hair or to the right to thin hair.
Cutting
Thinning
Longer
Shorter
Cutting hair
Before
starting,
4.
comb the hair in
the direction of hair
growth as shown.
Switch on the Clippers by sliding the On/off
5.
switch up toward the ‘ON’ position.
OPERATING INSTRUCTIONS
WARNING: NEVER USE THE
APPLIANCE ON WET HAIR. IT IS ONLY
DESIGNED FOR USE ON DRY HAIR.
When using this appliance for the first time it is
advisable to experiment initially on an area of light
hair growth.
Fit a comb attachment
Fit one of the Comb attachments by sliding it
1.
onto the Clippers as shown. The comb will click
into place when fully engaged.
Fit the small Comb attachment to cut hair
lengths in the range 4mm - 19mm or the large
Comb attachment to cut hair lengths in the
range 19mm- 34mm.