TRC13
EN
9
CARE AND CLEANING
The appliance must be unplugged before cleaning.
Remove the comb attachment (if fitted).
1.
Clean the blades and comb attachments
2.
with the cleaning brush (supplied) to remove
remaining loose hair clippings.
Clean the housing of the clippers with a soft,
3.
dry cloth.
The cutting blades should be lightly oiled with
4.
the oil provided once every few haircuts.
Using your thumb
2.
from the front of the
Clippers, press back
against the cutting
blades. The blade
assembly will snap
out of the housing.
Clean the blade
3.
assembly
and
inside the housing
thoroughly with the
cleaning brush.
Re-assemble the blade assembly by engaging
4.
the bottom latch, then pressing the top into the
housing
DO NOT use any harsh detergents, abrasives,
solvents or cleaners. NEVER immerse in water to
clean.
Dry thoroughly before use.
5.
To remove the cutting blades
Periodically it is advisable to remove the blade
assembly for more thorough cleaning.
Ensure that the ON/OFF switch is set to the ‘OFF’
1.
position.