HB19
EN
4
Unpacking
Unpack your blender carefully.
Packing list
•
Blender Motor
•
Blender attachment
•
Jug
If any items are missing or damaged return the item to
your nearest Tesco store for replacement. Please have your
receipt with you when you call.
Retain the packaging. If you dispose of the packaging do
so with regard to any recycling regulations in your area.
Before using your blender for the first time
Please read all instructions in this User Guide with
particular reference to the safety notes.
•
Check that the voltage marked on the rating plate
matches your mains voltage.
•
Clean the blender. Refer to the ‘CLEANING’ section for
instructions.
Important notes
•
The maximum time you can run the unit with no load
is 15 seconds.
•
Blades are very sharp, handle them with care.
•
Ensure that the blender motor is unplugged from
the power outlet before assembling or removing
attachments.
Operation
Power and speed control
The appliance features variable speed control.
TURBO
TURBO
TURBO
•
Set the speed you want with the
speed control before switching the
appliance on.
The small dots indicate slower
speeds, the larger dots indicate
higher speeds.
Use the slow speed where possible especially when
you commence blending, whisking etc or if you are
smoothing out lumps or reducing food to a puree.
The high speed can be used as a finishing touch or when
a particularly fine mix is needed.
•
Press and hold the On/Off button
to switch the appliance on.
•
Release the On/Off button to
switch the appliance off.
NOTE: Never run the appliance for more than 1 minute
continuously. After 1 minute of continuous running the
appliance should be left to cool for 3 minutes.
Turbo button
•
Hold the turbo button for a
momentary boost of speed.
NOTE: The turbo button should only be used for a few
seconds. Never hold the turbo button for more than this
time or the appliance may overheat.
