20
B. To Enter Auto Datalogging mode
1. Press
key until the beeper sound to enter this mode. The
“A-M INTV” marks are displayed, when the “A-M” mark is
disappear one time, one set of reading is stored to the memory.
2. The maximum memory capacity is 38000 sets.
3. Press
for 3 seconds or
key to exit this mode.
C. To Clear Auto Datalogged memorized data
1. Press
key to turn off the meter.
2. Press and hold down
key then press
key to turn on
the meter, LCD will show “CLr no M” mark, press
key one
time, LCD will show “CLr no A-M” mark, press
key select
“
” or “
”, then press
key exit this mode. If you
select yes the all auto datalogged memorized data memory will
be cleared.
5-13 RS232 Communication
Press
key 3 seconds the beeper will sound three times
to turn on this mode.
