17
C. Sort Operation
1. Press
key to enter the SORT mode, the reference value
and the sort tolerance limits is displayed.
2. The sort tolerance limits is divided into ten classes from -10 to -1
and +1 to +10 classes.
If the measured value over the tolerance limits, the +OL or -OL
will be display.
Example:
If the reference valus is 0.100 lumen, the sort tolerance limits is
50%, and the measured value is 0.073 lumen, then “SORT-6” is
displayed.
3. Press
key each time will store one measured value into
memory.
4. Press
key first then press
key to display the
manual memorized data value of Maximum (MAX), Minimum
(MIN) and Average (AVG), if the manual memorized data all are
measured in the same mode.
5. Press
key to exit the READ mode.
6. Press
key to exit the SORT mode.
MAX
MIN
AVG
5-10 Comparator Setting and Operation
A. Setting the comparator values
1. Press
key to turn on the meter.
2. Press
key first then press
key to enter the
comparator High limit value setting mode, the “ SET COMP
”
annunciator is displayed .
