TES TES-1307, Instruction Manual

Page: 5 / 7

(3). Stop recording :
(4). Reset datalogger :
Note : If “
REC
ERASE
” pressed while memory is full, “ ” will display.
7. MODE SETTING
MAX
MIN
AVG
▲
: Button for increasing the value of Parameters, increasing the
parameter rapid.
REL
J
: Button for moving to the desired parameter.
7-1 Date
Time Setting :
 Start with the power off mode. Keep pressing
T1 T2
T1-T2
button, then
press
ON
HOLD
OFF
button turn on, it will be enter setting mode.
8
 Press
C
F
(clock) button enter year.
 Press
MAX
MIN
AVG
button for increasing the value of parameters, increasing the
parameter rapid.
 Press
REL
J
button for moving to the desired parameter.
Set sequence : yyyy  MM  dd  hh  mm
Then pls press
C
F
(clock) button to save the set value. While in the set
mode, if users intend to escape from the mode and don’t want to save the
value, users can press
ON
HOLD
OFF
to end it.
※
Each data you recorded will be saved together with date and time.
7-2 Set for Recording interval time

Start with the power off mode. Keep pressing
T1 T2
T1-T2
button, then
press
ON
HOLD
OFF
button turn on, it will be enter setting mode.

Press
REC
ERASE
(INTV) button to set interval time.
 Press
MAX
MIN
AVG
button for increasing the value of parameters, increasing the
parameter rapid.

Press
REL
J
button to adjust the next parameter (second).
9

Press the
REC
ERASE
button again to
stop recording.
 Start with the power off mode.
Keep pressing
REC
ERASE
button,
then press
ON
HOLD
OFF
button turn on,
the LCD display “dEL”.