TERSO TS074e, User Manual

Page: 11 / 15

11 TS074e User Manual
GETTING STARTED
Components
Back Panel (Figure 1)
1. Reset
2. Bypass
3. Mute
4. WAN Ethernet Jack
5. Alarm Terminals
6. RFID Power
7. System Power
Refrigerator Front (Figure 2)
1. LCD Screen
2. Proximity Badge Reader
3. Unit Control Panel
4. Audible alarm enable/disable
5. Lock
1
2
3
4
5
6
7
FIGURE 1
1 2 3 4 5
FIGURE 2
Installation
Site
To operate this refrigerator properly and to obtain maximum performance, install the
refrigerator in a location with the following conditions:
A location with correct power outlets
• The refrigerator requires a grounded 120V 10A NEMA 5-15 outlet.
Unpacking the Terso Large RFID Refrigerator
Inspection
With packaging in place, inspect the refrigerator for any damage that may have occurred during
transit. If any damage is present, please contact Terso Technical Support at +1 (888) 376-0257 in
the US or +49 621 8501 233 in Europe.
Unpacking
• Remove the straps and remove all packaging. Gently position the refrigerator in place on
the ground.
• Remove accessories from inside the refrigerator. Items included are a Power Cable
and Ethernet Cable . Other items may also be included such as an Ethernet Hub or other
refrigerator specific items.
Proper Handling
Move the refrigerator to the installation site. There are wheels on the refrigerator to aid in
positioning. Roll the refrigerator by firmly pushing on the middle section of the body. Always move
the refrigerator with the door facing you. Carefully roll the refrigerator into position leaving at least
a 6” gap between the refrigerator and the wall.