TERRY Harmony Series 2 Homelift, Instructions Manual

Page: 8 / 24

General operation
Call the lift by pressing the UP or DOWN button on either call
station and wait for it to stop. The door will automatically open.
Enter the lift and press and release the door button to close it.
Then press and release UP or DOWN on the control station. The
lift will travel uninterrupted to the next floor. If the lift does not
start, check that the door is properly closed and try again. Always
close the door after using the lift by pressing the DOOR button on
the wall mounted call station. The lift should always be returned
to the lower level when not in use.
In the event that the normal controls fail to work, emergency
controls can be found under the flap above the mirror. Green is
‘UP’, red is ‘STOP’, black is ‘DOWN’ and white is ‘DOOR’. See
Fig.3
When outside the car, in an emergency the door can be opened
by pressing the front end of the side safe edge, on the corner
where the door opens (See Fig.3a).
9
Fig. 3 Fig. 3a