Terratek TTRTK, User Manual

Page: 20 / 24

19
V…………………………volts
A…………………………amperes
Hz……………………….hertz
~…………………….….alternating current
…/m……………….....revolutions per minute
.....................class II construction (double insulated)
Kg………………………..kilograms
n
0
………………………..No load speed
……………….….....Conforms to European Harmonised New Approach Directives.
DC ………………..…….Direct Current
Specific Safety Rules
1) Hold power tools by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring.
Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the
operator.
2) Wear ear and eye protection. To avoid serious injuries.
3) Be aware that this tool is always in an operating condition, since it does not have to be
plugged into an electrical outlet.
4) If the bit becomes jammed, immediately turn the trigger switch off to prevent an overload
which can damage the battery pack or motor.
5) Do not touch the rotating parts to avoid injury.
6) Do not use the tool continuously for a long period of time. Stop using the tool from time to
time to avoid overheating of the motor.
7) Do not drop the tool.
Unpacking
Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included.
Symbols
IMPORTANT: Some of the following symbols may be used on your tool.
Package contents
A) Grinder
B) 233 piece accessory kit
C) User manual