NOXON
ENGLISH
25
7 -
The setup menu of your NOXON
Press the
button of the remote control to open the setup menu of the device. There you will find the following
entries:
Setup menu
Device status
Important indicator for problems: query of current parameters such as IP
address, MAC No., firmware version, etc.
Internet radio [RSDB]
Submenu for configuring the station directory—see the chapter on "
The
radio
station directory"), page 32
Configuration wizard
Start the network configuration wizard here.
Select language
Select a language for the menus here.
Software Update
Your device can update itself automatically with the latest software version.
You can configure the corresponding settings in this menu.
Other settings
To the Advanced Settings submenu (see below.).
Config. Date/Time
All settings that relate to your NOXON's internal clock.
Equaliser
Configurations for the equaliser to adjust the sound (see below)
Other settings
Select profile
Switch between the various location profiles, for example if you want to reg-
ister your NOXON on different networks.
Profile management
With the profile management activated, another profile is selected automati-
cally any time the connection is lost. This also lets you switch locations easily
without setting up the same profile each time. Enable or disable profile man-
agement here. Select the profile you intend to use under "Profile Selection".
Key management
If more than one network key has been stored, the key management will
attempt to use them to maintain contact to the AP / network access point.
Edit device name
Assign a name to the device here.
LCD brightness
Controls the brightness of the LCD. The following options are available:
Low –
The "evening setting": The display is set to continuous low brightness.
High –
The display is set to continuous full brightness.
Automatic –
The software determines the brightness based on how the
NOXON is being used. In the normal case, the display is set to high bright-
ness, but is dimmed if there is no activity for a certain amount of time or if
the shutoff timer is in use.
FM sensitivity
Sets the sensitivity of the scan (high = many stations, low = only stations
with high reception quality)
Change LineIn name
Allows you to rename the line input as desired, for example to "CD player".
Software Update
