Notes for Windows users.
n
n
n
n
n
n
n
n
Close all audio software before disconnecting the USB connection to the PC.
The drivers have not been certified by Microsoft. You will receive a warning to this
effect in Windows 2000 and XP, which you can safely ignore. You can continue the
installation without concern.
After installing the drivers, open the “Device Manager” and check for yellow exclama-
tion marks.
Multiple MIDI HUBBLE modules cannot be cascaded at present.
The MIDI HUBBLE Control Panel is installed together with the drivers.
Notes for Macintosh users.
The MIDI HUBBLE is shipped with driver support for MAC OS 10 (OS X). In the OS10
version, we recommend the Apple operating system update called “Jaguar” (current
version 10.3.3). A version update, which can be obtained for an extra charge, contains
some improvements specially geared towards audio applications.
In MAC OS 10, the MIDI HUBBLE uses the operating system's own core MIDI driver,
making the installation of additional drivers unnecessary. The MIDI HUBBLE Control
Panel for the configuration of special functions (MIDI filter, thru routing and firmware
updates) requires MAC OS 10.3.3 or higher. However, the Control Panel is not obliga-
tory required for the MIDI HUBBLE.
Multiple MIDI HUBBLE modules cannot be cascaded at present.
The ports of the MIDI HUBBLE module
The front panel
·
First of all, you'll find the 5-pin DIN sockets of the
MIDI ports
(IN/OUT 1 and 2) on
the front panel. Each port has a signal LED to indicate activity.
·
The USB PORT LEDs
merely indicate that the USB ports on the rear panel of the
MIDI HUBBLE are operational. Data transfer activity is not signaled. In the event
that the current limiter of a USB port is tripped, the LED associated with the port
will go out and a message will be displayed by the operating system (Windows or
MAC OS X). To correct the problem, remove the last USB device you connected
MIDI HUBBLE (English)
7
