Self-powered operation with separate AC adapter
In addition to bus-powered operation without an AC adapter, the MIDI HUBBLE interface
can also be used in self-powered mode with its own AC adapter.
An AC adapter is only
necessary, however, if the connected peripherals have a total power consumption of more
than 440 mA (see above), or if you would like to conserve the power of your notebook
battery. When using an AC adapter, a full 500 mA are available at each USB port. A
regulated and well-stabilized 6V DC power supply capable of delivering at least 1.7 A is
required for this purpose (not included). Caution: use only the AC adapter available
separately from TerraTec (article number: 200067) for this purpose. The use of other
power supplies will void your warranty.
Installing the drivers under Windows 2000 and XP.
1. Disconnect the MIDI HUBBLE system from the USB bus.
2. Start the Windows driver installation via the autostart function of the included product
CD. Alternatively, go to the
<CD>:\MIDI HUBBLE\Software\Windows 2000_XP\Driver_Control Panel\ folder on
the CD and manually launch the installer “MIDI HUBBLE Setup Vx.x.exe”.
3. Follow the instructions of the installation program.
When the installation is complete, the MIDI HUBBLE system will be available in all
relevant applications as a MIDI device.
Installing the Control Panel in MAC OS X (OS 10.3.3 or
higher).
Administrator rights are required to install the Control Panel.
1. Disconnect the MIDI HUBBLE system from the USB bus.
2. Go to the <CD>:\MIDI HUBBLE\Software\MAC OS X\ folder on the included prod-
uct CD and copy the installer file “MIDI HUBBLE Setup Vx.xpkg” to the Macintosh
desktop before launching the installer.
3. Follow the instructions of the installation program.
6
MIDI Hubble (English)
