Disassembly
instructions
1
2
2
o (2) persons are recommended
1. Remove all pegs and release the poles from
the metallic pin on both sides.
2. Push n.1 black pole out of its tunnel.
3. Push n.2 grey pole out of its tunnel.
4. Fold the poles and place them in their case.
5. Fold the shader fabric to the center, till it
ends up same in width as the side pockets.
6. Place the pole and peg bags into one of the two
side pockets.
7. Using the pole bag as guide wrap the fabric
tightly from one pocket to the other and place
the shader in the carry bag.
Maintenance and storage instructions:
-Only water should be used when cleaning the
fabrics.
-The stains should be treated locally and
separately.
-The beach shader must be dry and clean before
storing.
-Poles and pegs should be stored in their cases.
-Select a dry and shady place to store the beach
shade.
w
T
