IC10/20FRLCD
Page 5
Safety information
To avoid risks and/or damaging the device:
• For indoor use only.
•Do not place the Auto-reader in a room exposed to
direct sunlight or to high luminous intensity lamps.
•Do not place the Auto-reader near devices that
emit strong electromagnetic fields.
•Do not use the Auto-reader on leaned surfaces
or on surfaces that are subject to shocks,
vibrations,temperature or high relative humidity.
•Disconnect the power cord before cleaning.
•Do not use abrasive, corrosive cleaners or
disinfectants.
•Do not immerse into any liquid . Do not pour any
liquid inside.
•Make sure the Auto-reader is connected to an
appropriate electrical mains outlet socket.
•Use only the included power supply (AC power
adapter), power supply's AC plug, power supply
cords, and Ethernet cable. Verify that all the
included elements are in good condition on daily
basis. If any of them is damaged, discontinue their
use. The use of cables, adapters, cords, and/or
power supplies different from the ones included
may cause fires, electrical shocks, or even physical
injuries.
•Do not plug any devices into the Auto-reader's
Ethernet port other than devices compliant with
IEC60950-1, IEC 62368-1 or comparable, with
safety extra-low voltages on its Ethernetports.
Screen References
Temperature Stability Indicator.
Alarm Cancellation Button.
Incubation Temperature Selection Button.
Incubation Results History Button.
Bionova
®
Information Button.
Start PRO Button (PRO configuration screen).
Program Configuration Button (SCBI configuration screen)
Position status Indicator.
Date and Time Indicator.
13:34 hs.
25/02/16
PRO Configuration Button.
SCBI Position Configuration Button.
Remaining Incubation Button.
Network connection indicator / Bionova
®
connection indicator.
Cancel PRO Button (PRO configuration screen).
Repeat Selection in all Positions Button (SCBI
configuration screen).
37 60
Protective Cover.
1
Incubation Area for 12 SCBIs and 1 Protein pen.
Ampoule Crusher.
2
3
LCD Touch Screen Display.
4
Thermal Printer.
7
Cavity for paper.
5
Printer's paper indicator light.
6
Paper Traction Button.
9
Hole for External Temperature Control.
8
Input for power source plug (12Volts DC).
10
Ethernet port (RJ45).
References
Symbols
Operating relative humidity.
Operating temperature.
Caution, Warning, Attention - Refer to the
instructions for use
Caution: Hot surface.
Important.
Direct current.
For indoor use only.
Keep away from sunlight.
Batch code.
Manufacturer.
Separate collection for waste of electrical and
electronic equipment.
80 %
30 %
10 ºC
30 ºC
LOT
Safety information