IC10/20FR
Page 12
- Hours setting:
Ten hours (
H
h:mm)
The blue light number 1 corresponding to PRO sector should be
on. If any other light from PRO sector is on, press
button as many times as necessary to turn on the blue light
number 1. This indicates ten hour setting.
To increase ten hours value, press button
. To reduce ten
hours value, press button.
- Hours setting:
Unit hours (h
H
:mm)
Press
button to turn on the blue light number 2. This
indicates unit hours setting. If any other light from PRO sector is
on, press
button as many times as necessary to turn
on the blue light number 2.
To increase unit hours value, press
button. To decrease unit
hours value, press button.
To increase ten minutes value, press
button. To decrease
ten minutes value, press button.
Minutes setting
- Minutes setting:
Ten minutes (hh:
M
m)
Press
button to turn on the blue light number 3. This
indicates ten minutes setting. If any other light from PRO sector
is on, press
button as many times as necessary to turn
on the blue light number 3.
- Minutes setting
: Unit minutes (hh:m
M
)
Press
button to turn on the blue light number 4. This
indicates unit minutes setting. If any other light from Pro sector
is on, press
button as many times as necessary to
turn on the blue light number 4.
To increase unit minutes value, press button.
To decrease
unit minutes value, press button.
Finish hours setting
To save changes press and hol-
dzbutton (see Figure
4) for three seconds. A beep will sound, PRO green light will turn
on and a ticket with the new set time will be printed to indicate
the procedure has been completed successfully.
NOTE
:
If the modification has not been done correctly,
the auto-reader will emit 3 beeps and the red light from
PRO sector will turn on. Repeat the procedure.
Cancel hours setting
To cancel hours setting procedure without saving the changes,
disconnect power source.
NOTE
:
the possible values for ten hour are 0, 1 and 2.
NOTE:
possible values for ten minutes are 0, 1, 2, 3, 4 and 5.
This function allows you to change the auto-reader printing
language.
Printing language change mode
Enter to
Printing language change
mode
De-energize the auto-reader.
NOTE:
each language has a code number assigned:
1:
English |
2:
Spanish |
3:
Portuguese |
4:
Turkish
Press and hold
button and energize the equipment. A
sound will be emitted to indicate Access to
Printing
language change
mode.
Instructions for use
