Figure 29. Firmware upgrade
6.11.5 User management
User may change a password here. Length of the password is up to 16 symbols. Type current password and double enter
new password to change it.
If logged in user has admin role, new users can be added (see Figure 30 "User management").
Figure 30. User management
Enter it’s username, password, select a role and press „Add“ button.
Only administrator (user with a role „admin“) may manage other users.
NOTE
: By giving your personal password or user access account for another person, you take full responsibility for all
module settings modifications made by that person or anyone else they may give the password to.
6.11.6. Restore defaults
All parameters will be restored back to factory defaults after confirmation. The exception – IP address and users – these
parameters will be unchanged. To restore IP address and system password to system defaults, see „
RESET
“ button at
section 3, pos.7.
Several seconds can take to restore all parameters, so be patient.
6.11.7. Restart the device
Device will be restarted after confirmation to do it. This is an alternative to pressing a „
RESET
“ button when the device is
operating.
16
