4
1
- SAT A V trunk input (SAT A VLo trunk input in Quattro LNB IF range input mode)
2
- SAT A H trunk input (SAT A HLo trunk input in Quattro LNB IF range input mode)
3
- SAT B V trunk input (SAT A VHi trunk input in Quattro LNB IF range input mode)
4
- SAT B H trunk input (SAT A HHi trunk input in Quattro LNB IF range input mode)
5
- DTT trunk input
6
- SAT A V trunk output (SAT A VLo trunk output in Quattro LNB IF range input mode)
7
- SAT A H trunk output (SAT A HLo trunk output in Quattro LNB IF range input mode)
8
- SAT B V trunk output (SAT A VHi trunk output in Quattro LNB IF range input mode)
9
- SAT B H trunk output (SAT A HHi trunk output in Quattro LNB IF range input mode)
10
- DTT trunk output
11
- dSCR output2 pair D (UB+DTT)
12
- dSCR output1 pair D (UB+DTT)
13
- dSCR output2 pair C (UB+DTT, SRM584, SRM584T only)
14
- dSCR output1 pair C (UB+DTT, SRM584, SRM584T only)
15
- dSCR output1 pair A (UB+DTT)
16
- dSCR output2 pair A (UB+DTT)
17
- dSCR output1 pair B (UB+DTT)
18
- dSCR output2 pair B (UB+DTT)
19
- Wideband / Quattro switch
20
- DC IN(H) 20 V power input, switchable to H lines by switch pos. 21 (see „Installation instructions”)
21
- DC power to/from H trunk lines switch (see „Installation instructions”)
22
- DC IN(V) 20 V power input, switchable to V lines by switch pos. 23 (see „Installation instructions”)
23
- DC power to/from V trunk lines switch (see „Installation instructions”)
24
- DC IN(H) and DC in V trunk lines LED indicator (see „Installation instructions”)
25
- DC IN(V) and DC in H trunk lines LED indicator (see „Installation instructions”)
26
- DiSEqC control/configuration port
27
- Functional grounding clamp
All sockets are “F” type.
Installation instructions
Read the safety instruction first.
Fit multiswich on mounting place and connect it (pay attention to the multiswitch inputs and Wideband or Quattro LNB
outputs marking, connect the isolated 75 Ω loads to the unused RF output F sockets), power on multiswich using one of 7
powering modes (see Table 1).
