Terra PA420T, Quick Start Manual, Page: 4 / 5

4
Technical characteristics
Type PA420T
* programming from Android device via OTG cable, this cable is sold separately
** without external DC load, with maximal external DC load - 9 W
RF inputs
Frequency range FM 87-108 MHz
2xVHFIII/UHF1 174-240 MHz / 470-694 MHz
UHF 470-694 MHz
RF input level FM 69-89 dBµV
VHF/UHF 50-100 dBµV
Gain FM 29 dB
VHF/UHF 63 dB max.
Noise figure 7 dB
AGC VHF/UHF 46 dB in each filter
Slope adjustment FM -
VHFIII/DAB/UHF 5 dB
Selectivity VHF/UHF ±1 MHz > 30 dB
FM ±20 MHz > 20 dB
LTE 5G
Number of channels 20 max.
Number of filters 20 max.
RF output
Output level FM 106 dBµV max.
UHF 113 dBµV max. (1 - 6 MUX)
110 dBµV max. (7 - 12 MUX)
109 dBµV max. (13 - 16 MUX)
108 dBµV max. (17 - 20 MUX)
VHF 3 dB less than UHF
RF output adjustment FM 0 ÷ -20 dB
VHF/UHF common 0 ÷ -20 dB
VHF/UHF each channel ± 3 dB
RF test 30 dB
Powering
DC feeding VHFIII/UHF1
12 V 100 mA per input, OFF/ON
for external VHFIII/UHF2
Power consumption 230 V~ 50/60 Hz 6 W**
General
Return loss > 10 dB
Operating temperature -20
0
C
÷
+50
0
C
Dimensions/Weight (packed) 192x147x55 mm/0.66 kg
Recommended accessories:
1. Power supply SYS1381N-1212-W2E (12 V 1 A) (for PA321T).
2. Power inserter PI018 (for PA321T).
3. OTG cable.
S oftware update
Download the new software version to Windows PC. Connect the amplifier to the PC (see TERRnet App) . Remove the
plastic cap from the “F” connector nearest to the “Control” connector. Connect 75 Ω load to it. Power amplifier. Copy the new
software file to the appeared disk in the file browser. Remove 75 Ω load and reconnect power.
pr.
pr.
pr.
pr.
pr.
software control
pr.