Quick-Start Operating Guide
High- CleanBooth™ Laminar Flow Station
©
Copyright 2020 Terra Universal Inc. All rights reserved • Revised May 2020 • Document No. 1800-73
v2.0tm
Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020
14
Fluorescent Tube
Cat. #
For 47” fixture
3800-60
For 35.5” fixture
3800-61
Replacement Fluorescent Fixture
(including bulb)
47”
1870-11
35.5”
Ionizing Bar
The ionizing bar requires periodic replacement of its Tungsten emitter (recommended every two years).
To replace emitter screw
, use 1/4-inch hollow socket to remove stainless steel emitter screw from the ionizing bar.
Use care not to damage the whisker emitter when placing the socket over the screw head. Replace with unit below.
Cat. #
Tungsten Emitter
1525-93
Cleaning Frame and Curtains
Periodically, wipe down frame and optional curtain with a clean, non-linting wiper (polyester recommended), using
clean water and a mild detergent, if necessary. Use unidirectional (not circular) motion to remove surface
contaminants from the edges of all surfaces.
5.0
Specifications
Overall Dimensions (see drawings for details)
No. 1870-54
53"W x 30"D (base)/28"D (top) x 63.5 / 91"H
No. 1870-56
77"W x 30"D (base)/28"D (top) x 63.5 / 91"H
Construction
Frame: 1" x 1" and 1" x 3" square CR steel tubing, powder-coated white
FFU:
Aluminum housing (see other FFU specs below)
Performance: Meets or exceeds the requirements/specifications of the following industry standards:
ISO Class 4 (Class "100" (M 3.5)) air per the latest I.E.S.T. 14664-1 (Airborne Particulate Cleanliness Classes).
I.E.S.T. Recommended Practices (Laminar Flow Clean Air Devices) Specifications
Fan Filter Unit Specifications:
Airflow Velocity:
90 (±10) FPM (.45 m/s), when measured using a Velgrid (eight readings) 6 in. (152mm)
below the filter face.
