background image

Quick-Start Operating Guide 

 

 

Series 310 Glove Box 

© 

Copyright 2017 

Terra Universal Inc.  All rights reserved.  • 

Revised Feb. 2017 

• Document No. 1788-10 

v2.0tm

 

Terra Universal, Inc.  •  TerraUniversal.com  •  800 S. Raymond Ave.  •  Fullerton, CA  92831  •  TEL: (714) 578-6000  •  FAX: (714) 578-6020 

 

 

 

4.0

 

Maintenance 

 
Terra  Universal’s  work  stations  are  designed  for  low-maintenance  needs  for  the  entirety  of  the  unit’s  operational 

lifetime.    With  no  user-serviceable  parts,  these  unites  only  require  periodic  cleaning  to  preserve  their  like-new 
condition. 
 

Terra’s Glove Boxes require minimal maintenance.  All materials are easy to clean with water or mild detergent and a 
dry, clean wipe.  

 
All materials are easy to clean with clean, lukewarm water with or without a mild, non-abrasive detergent and a dry, 
clean non-abrasive wipe. Use only light pressure when cleaning. If the outside surface is exceptionally dirty or gritty, 

lightly swab the surface with a saturated cloth and allow the surfactants to drain away. Avoid rubbing dirt or grit into 
the surface. Turn the cloth often and replace with a clean cloth frequently. Dry the surface by blotting gently with a 
clean, dry cloth. 

 

Summary of Contents for 310 Series











Reviews: