background image

Quick-Start Operating Guide 

 

 

Series 310 Glove Box 

© 

Copyright 2017 

Terra Universal Inc.  All rights reserved.  • 

Revised Feb. 2017 

• Document No. 1788-10 

v2.0tm

 

Terra Universal, Inc.  •  TerraUniversal.com  •  800 S. Raymond Ave.  •  Fullerton, CA  92831  •  TEL: (714) 578-6000  •  FAX: (714) 578-6020 

 

 

 

For Use as a Ventilation Chamber 

 

Sept2313 

 
This  configuration  includes  a  filter/blower  module  that  ventilates  fumes  inside  the  Series  310  Glove  Box.  The 
ventilation module comes installed, ready for operation. In ductless applications, it includes an activated charcoal filter 
to remove organic fumes. A final HEPA filter can be included to remove particulates for use in a cleanroom.

  

 

 

Vacuum line 
Solenoid valve line 
Power (110 or 220) 
Sensor Wire safety vacuum relief 

Vacuum 
Controller 

Vacuum  
Bleed Valve 

Negative-
Pressure 
Air Lock 

Vacuum 
Sensor 

Vacuum  
Shut-Off Valve 

Solenoid Valve 

Vacuum Pump 

Vacuum line 
Solenoid valve line 
Power (110 or 220) 
Sensor Wire safety vacuum relief 

Refer to connection 
diagram on the 
following page. 

Vacuum Bleed 
Valve 

Gloves removed, 
replaced with port caps 

Vacuum Shut-
Off Valve 

Solenoid Valve 

Vacuum Pump 

Summary of Contents for 310 Series











Reviews: