Terra Universal 100 Series Quick Start Operation Manual Download Page 13

Timer Adjustment:

Factory set at 60 seconds (adjustable)

Internal Positive Pressure: 0-0.5 inches of water

Fuse:

1/2 Amp

NitroWatch

Dimensions:

11"W x 6.5"D x 3"H

Power:

12 V/DC (from Dual Purge)

Sensor Dimensions:

1.5" x 0.75" x 4"

Case Material:

Stainless steel

Display:

3.5 digit LED display

Electrical Connections:

Screw terminals

Output: 0-5 

V

Measuring Range:

0-100% RH

Accuracy (at 20° C):

± 3% RH

Resolution:

± .1% RH

Temp. Dependence:

± .04% RH/°C

Sensor Calibration:

None required, but scale offset routine allows display compensation.

Filtration Modules
Closed-Loop Filtration Module

Blower:

460-CFM impeller 

Filter:

HEPA filter (rated 99.99% efficient @ 0.3 micron particles)

Open-Loop Filtration Module

Blower:

460-CFM squirrel-cage blower 

Filters (inlet and exhaust): HEPA filter (rated 99.99% efficient @ 0.3 µm particles)

8.0 Warranty

Products Manufactured by Terra:

Terra Universal, Inc., warrants products which it manufactures to be free from defects

for a period of 90 days for parts and labor. Terra’s sole responsibility is to repair or replace, at its option, any part of the product
which proves defective or malfunctioning during this time limit. In some cases, components incorporated in Terra Universal
products are covered by additional warranties from component manufacturers; obtain specific information from Terra sales
representatives. This warranty is void if the equipment is abused or modified by the customer, is operated outside Terra’s operating
instructions or specifications, or is used in any application other than that for which it is specified. This warranty does not include
routine maintenance or service procedures, breakage of quartz baths after 60 days, shipping damage, nor damage from misuse,
intentional or unintentional abuse, neglect, natural disasters, or acts of God.

Products Manufactured by Others:

Terra Universal, Inc., warrants that, to the best of its ability, Terra’s representations

of products which are manufactured by others reflect the manufacturer’s representations, subject to change without notice. Sole
warranty for these products is the original manufacturer’s warranty which is passed forward to the purchaser and constitutes the
customer’s sole remedy for these products. Detailed warranties for distributed products are available through Terra sales
representatives.

All Claims:

Terra Universal expressly disclaims all other warranties, expressed or implied or implied by statute, including the

warranties of merchantability or fitness for intended use. Terra Universal is not responsible for consequential or incidental
damages arising out of the purchase or use of the products supplied by Terra Universal. Terra Universal is not liable for damage
to facilities, other equipment, products, property or personnel of others, or of their agents, suppliers, or affiliated parties which is
caused or alleged to have been caused by products supplied by Terra Universal. In any event or series of events, Terra Universal’s
total liability for any and all damages whatsoever is limited to the lesser of the actual damages or the original invoice cost of the
items alleged to have caused the damage. The customer’s sole and exclusive remedy for any cause of action whatsoever is repair

Quick-Start Operating Guide

Series 100 Polymer Glove Box

© Copyright 2004 Terra Universal Inc. All rights reserved.

•    Revised December 2004    •    Document No. 1800-42

®

®

11

Terra Universal, Inc. • TerraUniversal.com • 700 N. Harbor Blvd. •  Anaheim, CA 92805-2553 • TEL: (714) 526-0100 • FAX: (714) 992-2179

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 100 Series
















Reviews: