8.
Fold the tent so the folded seams are in line with the Airflex pole direction and so the
groundsheet does not come in contact with the outer fabric of the flysheet to help keep the
flysheet clean. Top tip – fold from the back of the tent first to expel the air from the bedroom
compartments.
9.
Fold until the tent is the width of the tent bag and then roll it up towards the valve side of
the tent to expel all of the air. Place the valve end of the tent on the small attached tarp and
then tuck that end into the bag. Simply roll the tent into the bag and then put the peg bag
inside. Top tip – it is preferable to leave the pump out of the bag to prevent damage. Close
the bag by folding the small tarp inside and clip the buckled webbing straps across the top.
Please use the buckled webbing straps to help squeeze the remaining air out of the tent and
then gently pull on the toggled draw string to complete the process.
Summary of Contents for Wild Country Zonda 8EP
Page 9: ......
