Once the tent has taken shape close all of the entrances so that the tent can be tensioned correctly.
At this stage you may need to reposition the corner pegs to ensure that the groundsheet is taut and
that the sides are all in line. Now fully extend out the main end webbing guy tapes and add 5 to 6
twists to each (this helps reduce wind noise) before pegging them out properly using the larger V
pegs supplied. Now add some tension to the tapes to pull the outer tent fabric taut. Top Tip – Don’t
over tension the tapes as this will pull the roof height down.
Using the wire pegs, peg around the sides and ends of the outer tent using the webbing pegging
points provided. Most have a buckle for adjustment and these should be slackened off before
pegging. Top Tip – Do not peg through the stitched webbing loop. Slacken the webbing behind the
buckle and peg through the resulting loop.
Summary of Contents for Wild Country Zonda 8EP
Page 9: ......
