TERMOZETTA TZ3500, Instruction Manual

Page: 15 / 36

• Place the appliance on a firm flat surface.
• Rest the iron on the boiler base (3).
• Select the proper temperature by turning the control knob (13) on the iron (figure 1).
• Completely unwind the power cord (7) and plug into the outlet.
• Put switch (2) to position “1” to turn on the appliance.
• When the pilot light (14) goes out, the iron is ready for use.
• The pilot light (14) on the iron will light up and go out automatically while you are ironing
to show that the soleplate is being kept at a constant temperature.
• When you have finished ironing to turn off the appliance. Let the iron cool down.
Always unplug the iron from the outlet and wait for the appliance to completely
cool down before starting any cleaning operations.
Use a normal damp sponge to clean the soleplate.
Use a damp cloth to clean the rest of the iron and the boiler shell only.
Never immerse the appliance or parts of it into water or other liquid, do not use steam,
chemical or abrasive substances.
CLEANING
FOR DRY IRONING
In case of anomalies, see the table below before calling the Service Centre.
TABLE TO BE USED IN CASE OF ANOMALIES
PROBLEMS SOLUTIONS
The appliance is not working Make sure the power cord is plugged into the
outlet.
Make sure there are no problems with the mains.
The iron soleplate does not heat Make sure you turned the temperature control knob
on the iron
The appliance is connected to the mains and stops
working
Call the Service Centre
The appliance is connected to the mains and the
switch is put to position “1”, but the appliance does
not work
Call the Service Centre
The appliance is on but it does not work Call the Service Centre
ENGLISH