16
24.
Before connecting the unit to the electricity distribution network ensure
that the main voltage is correct as shown on the label of the product
and that the unit is compliant with the current regulations.
25.
Do not use flying sockets or damaged cables.
26.
Hold the plug firmly when disconnecting from the electric socket to
prevent electric shock , short circuit or fire.
27.
Before connecting the unit to the electricity distribution network ensure
that the main voltage is correct as shown on label of the product and
that the unit is compliant with the current regulations.
28.
Do not use the product for purposes other than those for which he '
was built Don
’
t use improperly the appliance.
29.
Do not use flying sockets or damaged cables.
30.
The heater must not be located immediately below an electrical
socket-outlet.
31.
Don
’
t use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
32.
Never locate the heater where it may fall into bathtub or other water
container.
33.
Before performing maintenance and cleaning, disconnect the
appliance from the main supply.
34.
Not use aerosols spray (for ex. Insecticides, hair spray, etc.), it may
cause damage to the housing.
35.
In case the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person to
avoid any hazard.
36.
Never use outdoors and never expose the appliance to atmospheric
agents.
37.
Do not cover abnormal situations immediately switch off the appliance
and contact your dealer or service center.
38.
Do not use outdoors or obstruct any of the heat outlet grilles or the air
intake openings of the heater
