•
CLEANING AND STORING
There are no parts inside the machine that require your attention or servicing . Do not try to open the outer case.
By doing so you could damage the motor and heating element and invalidate the warranty. If you have a problem
with the heater, or if the power cord gets damaged in any way , you must take the unit to a suitably qualified
engineer or electrical repair center.
Before cleaning the machine, please make sure it is disconnect from the power supply, and has cooled down
completely.
Never clean the machine with water and do not let it get wet under any circumstance.
The outside case can be cleaned using a slightly damp lint-free cloth [ a small amount of detergent can be used if
required ].
To remove any dust particles etc from inside the front grill, or the rear air intakes, you can use a regular vacuum
cleaner.
Always make sure the machine is completely dry before using.
If you are not going to use the heater for a while it is best to make sure it is clean and dry and then store it inside
a plastic bag in a cool dry place.
With sensible care and attention this heater will give you many years of good service and economical heating.
