Termozeta Airzeta Clima C7, Instruction Manual

Page: 16 / 24

16
5. Display Window
6. DOWN Key: Under timer mode, press this key to adjust the timer downwards.
Under cooling and heating mode, press this key to adjust the temperature lower.
This function is not available under FAN mode and DEHUMIDIFYING mode.
7. Mode Key: When the unit is on, press this key to switch bet
ween cooling → dry→ fan → heating mode.
8. Sleep Mode: When the power is on and in cooling mode (or heating mode), press 'SLEEP' button to start the sleep mode.
Under sleep mode, the FAN speed is set to LOW speed and not adjustable. The SLEEP mode can be cancelled by
pressing the button.
9. Power Key: Press this key to turn on and turn off the unit.
Noted :
MEMORY FUNCTION: The appliance maintains its settings during a power failure
2. Operation instructions of remote control
The air conditioner can be controlled with the remote control. Two AAA-batteries are required to use the
remote control.
POWER : Press the POWER button to turn the unit on and off.
MODE : Press the MODE button to switch between cooling, dry, fan, heating modes.
UP : Press the UP button to increase the desired temperature and set the duration of the timer.
DOWN : Press the DOWN button to reduce the desired temperature and set the duration of the
timer.
FAN : Press the FAN button to cycle between high, medium and low fan speeds.
TIMER : Press the TIMER button to set the duration of the power on or power off timer.
SWING : Press the swing button to change the orientation of the louvres to direct the air
TEMPERATURE UNIT : Press to switch between displaying the temperature in Celsius
and Fahrenheit.
SLEEP MODE : Press to turn on the sleep mode. The unit will work with energy saving
logic and the lowest fan speed.
PROTECTIONS
1: Frost Protection Function:
In cooling mode, if the temperature of the exhaust pipe is too low, the unit will automatically enter protection status; if the
temperature of the exhaust pipe rises to a certain temperature, it can automatically revert to normal operation.
2: Overflow Protection Function:
When water in the water pan exceeds the warning level, the unit will automatically sound an alarm, and the "FULL" indicator
light will flash. At this point, you need to move the drainage pipe connecting the unit or the water outlet to sewer or other
drainage area to empty the water (details see Drainage Instructions at the end of this chapter). After the water is emptied, the
unit will automatically return to the original state.
3: Automatic Defrosting (heating models have this function):
The unit has an automatic defrosting function. Defrosting can be achieved through four - way valve reversing.
4: Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection function after the compressor is
turned off.