IT
ALIANO
ENGLISH
3
08/2021 - EN
INDEX
1
GENERAL INTRODUCTION
>
4-6
1.1 SYMBOLS
1.2 DESTINATION OF USE
1.3 SCOPE AND CONTENTS OF MANUAL
1.4 STORAGE OF MANUAL
1.5 UPDATE OF THIS MANUAL
1.6 GENERAL INFORMATION
1.7 MAIN STANDARDS APPLIED AND TO BE APPLIED
1.8 LEGAL WARRANTY
1.9 MANUFACTURER’S LIABILITY
1.10 CHARACTERISTICS OF THE USER
1.11 TECHNICAL ASSISTANCE
1.12 SPARE PARTS
1.13 IDENTIFICATION PLATE
1.14 STOVE DELIVERY
2
SAFETY WARNINGS
>
7-8
2.1 WARNINGS FOR THE INSTALLER
2.2 WARNINGS FOR THE MAINTENANCE TECHNICIAN
2.3 WARNINGS FOR THE USER
3
CHARACTERISTICS OF FUEL
>
9
3.1 CHARACTERISTICS OF FUEL
3.2 STORAGE OF PELLETS
4
HANDLING AND TRANSPORT
>
9
4.1 REMOVAL FROM TRANSPORT PALLET
5
INSTALLATION >
10-14
5.1 GENERAL CONSIDERATIONS
5.2 SAFETY PRECAUTIONS
5.3 PLACE OF INSTALLATION OF STOVE
5.4 COMBUSTION AIR
5.5 FLUE GAS EXHAUST PIPE
5.6 STOVE LEVELLING
5.7 CONNECTION TO UTILITIES
5.8 OPTIMISATION OF COMBUSTION
5.9 VENTILATION
6
MAINTENANCE >
15
6.1 MAINTENANCE
7
DEMOLITION AND DISPOSAL
>
16
8
USE >
17-18
8.1 INTRODUCTION
8.2 FIRST START-UP
8.3 CONTROL PANEL
8.4 MAIN MENU
8.5 SETTING THE TEMPERATURE
8.6 SETTING THE OPERATING PROGRAM
8.7 TURNING ON THE STOVE
8.8 TURNING OFF THE STOVE
8.9 RESETTING SYSTEM ERRORS
8.10 HEATING MODE
8.11 PELLET SAVING MODE
8.12 AUTOMATIC OR MANUAL MODE
8.13 MANUAL
8.14 AUTO
9
USER PROGRAMMING
>
19
9.1 DATE AND TIME SETTINGS
9.2 WEEKLY PROGRAMMER
9.3 PROGRAM NUMBER
9.4 DAY OF THE WEEK
9.5 HOURS
9.6 MINUTES
9.7 REQUIRED TEMPERATURE
9.8 REQUIRED PROGRAM
9.9 PROGRAM TYPE
9.10 ENABLING THE PROGRAM
9.11 EXAMPLE OF PROGRAMMING
10
STOVE PARAMETERS
>
20
10.1 LOADING PELLETS
10.2 FUME EXTRACTION
10.3 ROOM FAN
11
LANGUAGE SELECTION
12
LAST ERROR LOG
13
DUCTED >
20
13.1 DUCTED LEFT
13.2 DUCTED RIGHT
14
DIAGNOSTIC ERRORS
>
21
14.1 ERROR 1 NOT ACTIVE
14.2 ERROR 2 PRESSURE SWITCH ALARM
14.3 ERROR 3 NO PELLETS
14.4 ERROR 4 NOT ACTIVE
14.5 ERROR 5 HIGH EXHAUST TEMPERATURE ALARM
14.6 ERROR 6 SAFETY THERMOSTAT
14.7 ERROR 7 SMOKE EXTRACTION MOTOR ALARM
14.8 ERROR 8 NOT ACTIVE
14.9 ERROR 9 NOT ACTIVE
14.10 ERROR 10 NOT ACTIVE
14.11 ERROR 11 NOT ACTIVE
14.12 ERROR 12 POWER FAILURE
14.13 ERROR 13 NOT ACTIVE
14.14 ERROR 14 NOT ACTIVE
14.15 ERROR 15 IGNITION FAILURE
14.16 ERROR 16 INTAKE SENSOR FAULT (ONLY IF INTAKE SENSOR
ENABLED)
14.17 ERROR 17 NOT ACTIVE
14.18 ERROR 18 FUME EXTRACTION CIRCUIT FAULT
14.19 ERROR 19 OVERTEMPERATURE ALARM
REMOTE CONTROL (OPTIONAL)
15
PRELIMINARY OPERATIONS
>
22
15.1 PELLET LOADING
15.2 ELECTRICAL POWER SUPPLY
15.3 POWER ON
15.4 POWER OFF
15.5 OPERATION WITH ROOM PROBE ON STOVE
TROUBLESHOOTING
>
24
16
CLEANING >
26
17
FRAME ASSEMBLY
>
28
18
HOT AIR DUCTING
>
29
19
3RD TANGENTIAL FAN
>
30
ID PLATE KEY
>
31
WIRING DIAGRAM
>
32
DESCRIPTION
>
33
TECHNICAL SPECIFICATIONS
>
34
REMOVAL FROM PALLET
>
36
MINIMUM DISTANCE FROM COMBUSTIBLE MATERIALS
>
36
DIMENSIONS
>
37
