www.termoprodukt.com.pl
16
5.
Set a method of start in a "Registration" tab, a logging rate and a task
after filling a device's memory. In case of choosing a logging with a
timing, choose a date and time.
6.
Set temperature alert ranges in the "Settings" tab.
7.
Close the LogSoft, disconnect the device and place it in a desirable
location.
8.
In case on setting device's work from the computer or by a keyboard
on the device's panel the device would start storing according to its settings. If one
set the start from the device's keyboard, they have to push a "START" button for a
few seconds. To stop storing with "All the time" option, change it to "NO" in
Settings.
Click and push here for 3 seconds until you see "LOG" on display to start the registration.
"LOG" on display informs the user that the registration was started. To stop the registration
push "STOP" button for 2 seconds until you see "WAIT" on display.
11. Device's work
The first measurement is saved to device's memory after starting the registration. Next
registrations are saved in a logging range set before. The user can observe device's work on
display. If it's working, one can see "LOG" and "WAIT" if it's waiting. The user can also display
one value on screen. Push "MIN/MAX start" button to change displayed value to:
