1.
Power On: Press
for 3 seconds to light up screen, then press
2.
Adjust Set Temperature: When screen is unlocked, press
3. Mode Selection: Press
to select mode.
a. Auto
: adjustable temperature range 12~
b. Heating
: adjustable temperature range 18~
c. Cooling
: adjustable temperature range 12~30
4. Turbo/ Smart/Silence mode selection:
①
Smart mode as default will be activated when heat pump is on
②
Press
to enter Silence mode, and sc
(Suggestion: select Smart mode for initial
Attention:
a. When use the Turbo mode, you should select it every time, the machine will not automatically enter the
b. During the Turbo mode, when the machine reaches the set temperature, it will automatically return to the smart
mode.
5. Defrosting
a. Auto Defrosting: When heat pump is defrosting,
b. Compulsory Defrosting: When heat pump is heating, press
defrosting, and
will be flashing. After defrosting,
(Note: Compulsory defrosting intervals should be more than
10 minutes.)
6 Temperature display conversion between
Press "
" and "
" together for 5 seconds to switch between
7. Wifi setting
Please kindly check the last page.
8
for 3 seconds to light up screen, then press
to power on heat pump.
Adjust Set Temperature: When screen is unlocked, press
or
to display or adjust the set temperature.
to select mode.
: adjustable temperature range 12~40
℃
: adjustable temperature range 18~40
℃
adjustable temperature range 12~30
℃
Smart mode as default will be activated when heat pump is on, and screen shows
mode, and screen shows
.
(Suggestion: select Smart mode for initial heating)
mode, you should select it every time, the machine will not automatically enter the
mode, when the machine reaches the set temperature, it will automatically return to the smart
Auto Defrosting: When heat pump is defrosting,
will be flashing. After defrosting,
Compulsory Defrosting: When heat pump is heating, press
and
together for 5 seconds to start compulsory
will be flashing. After defrosting,
will stop flashing.
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for more than
Temperature display conversion between
℃
and
:
℉
together for 5 seconds to switch between
℃
and
.
℉
to power on heat pump.
to display or adjust the set temperature.
.
mode, you should select it every time, the machine will not automatically enter the Turbo mode.
mode, when the machine reaches the set temperature, it will automatically return to the smart
will stop flashing.
together for 5 seconds to start compulsory
minutes and the compressor should run for more than
