Connection scheme for the thermal safety valve: 1. Cold water entering from the water supply system 2.
Cold water entry into boiler 3. Hot water going outside the boiler 4. hot water ending in the sewage water
system 5. Thermo-valve sensor
To connect the safety valve:
•
Connect the sensor of the valve (outter thread 1/2") at depicted place on the boiler, position 5
(inner thread 1/2")
•
Connect the cold water entry (on valve's input is marked with C) than connect the exit line (valve
marked with:
→
) with the corresponding exit line on the boiler (position 21)
•
Connect position 21 (on the boiler) with the input line on the valve (valve is marked with:
←
)
•
Connect the valve (marked with S) to the sewage system.
14