SECTION 3 : The Installation of The Product
:
The location where the cooker is to be placed should be in the appropriate
dimensions and in the appropriate form.
After the product is cleared from its packaging materials, make sure that the
cooker section or any of the other equipment had not been damaged. In case you
have any doubts that the product might be damaged, please get in touch with the
technical personnel of the authorised service immediately and do not use the
product.
The cooker is going to be fixed to the kitchen counter as shown in Figure 3. The
thickness of the surface where you will be replacing your built-in cooker should
not be more than 20 mms.
Kitchen Table Sealing Gasket Built-in Cooker
Figure 3
Connection Shoe
3. b. The electric connection of the cooker :
Before making the electric connection of the cooker, please make sure that you
have provided the circumstances that have been mentioned below :
•
The current transmission capacity of the system and the socket should
be appropriate for the maximum power that the cooker could utilise.
•
The voltage value that has been provided in the capacity sticker and the
supply voltage should be the same value.
•
Do not use adapters, short cables or extensions for the said connection.
These may cause over heating.
•
The socket should have a grounding terminal.
The total power of the product is
000 Watts.
The product has been manufactured to be operated with
1
AC
9
+]
The electric connection figures are shown in Figure 4. These figure are also
shown at the bottom part of the product. The electric chart of the product had
been provided in Section 6.
Using the said chart, connect the sockets to the female sockets on the built-in
oven making sure that colours would match.
